DIP switch S2/2: Source of setpoint f1

Use this DIP switch to select the source of the speed setpoint f1.

• Potentiometer f1 (S2/2 = OFF): The settings of potentiometer f1 define the speed of the drive unit when setpoint f1 is active (see chapter "Startup" > "Control elements" > "Potentiometer f1").
• Analog input AI1 (S2/2 = ON): The value of analog input AI1 determines the speed of the drive unit when setpoint f1 is active. (See chapter "Operation" > "Setpoint scaling of the analog input".