"ERR" LED
The following table describes the display functions of the "ERR" LED:
LED | Meaning |
|---|---|
Off | No error The interface is in operating state. |
Red Flickering | Boot error A BOOT error has occurred. "INIT" state has not been reached. However the "Change" parameter is set to "0x01:change/error". |
Red Flashing | Invalid configuration A general configuration error has occurred. |
Red Flashing once | Unrequested state change The slave application has changed the state automatically. The "Change" parameter is set to "0x01:change/error". |
Red Flashing twice | Application watchdog timeout A watchdog timeout error has occurred in the application. |
Red Illuminated | PDIPDI = Process Data Interface A PDI watchdog timeout error has occurred. |
