Hardware

The following hardware is required:

  • MOVI-C® CONTROLLER of the following performance class
    • To use MOVIKIT® StackerCrane with MultiMotion, MOVI-C® CONTROLLER of all performance classes can be utilized.
    • To use the MOVIKIT® StackerCrane with the MultiAxisController, at least one MOVI-C® CONTROLLER UHX45A is required.
    • To use the MOVIKIT® StackerCrane with the MultiAxisController and the AntiSway add-on, at least one MOVI-C® CONTROLLER UHX45A is required. The cycle time must be adjusted to 4 ms.

INFORMATION

Make sure that all drives of a MultiAxisController axis group have the same drive train. Otherwise, contact SEW‑EURODRIVE.