Startup notes

INFORMATION

  • Correct project planning for the drive is a prerequisite for successful startup. See chapter "Project Planning" for more information.
  • The motor speed must not exceed 2000 min-1. Set the maximum speed on the frequency inverter. For information on the procedure, refer to the documentation of the frequency inverter.

Perform the following steps before startup:

  1. WARNING! Electric shock caused by dangerous voltages in the connection box. Severe or fatal injuries. De-energize the device. Pay attention to the 5 safety rules in chapter “Carrying out electrical work safely”.
  2. WARNING! Risk of burns due to hot surfaces. Severe injuries. Let the device cool sufficiently before touching it.
  3. Install the protective covers of the system according to the instructions. This will avoid injuries.
    • Never start the device if the protective covers are not installed.