Configuring the data source

To link the visualization elements with the corresponding variables from the IEC project, a data source needs to be configured in the visualization project. The data source is used to read the current variable information from the IEC project on the controller part of the MOVI-C^® CONTROLLER.

The configuration of the data source will vary depending on whether the visualization is set up on an external Windows system or on the Windows part of the MOVI-C^® CONTROLLER UHX65A.

INFORMATION

If you have any questions regarding the implementation of further combination and configuration options, contact the SEW-EURODRIVE Service department.

• For an external Windows system
• For MOVI-C® CONTROLLER UHX65A
• Updating variable information