Creating a boot application

You have to create a boot application so that the previous program will still be available after switching off and on the MOVI‑C® CONTROLLER.

  1. Open the [Online] menu and select [Create boot application].
    • The boot application is saved on the MOVI‑C® CONTROLLER so that the MOVI‑C® CONTROLLER starts with the IEC program after deactivation and activation.

INFORMATION

You have to generate the boot application again after a change to the IEC project. Otherwise the old program will be started after deactivation and activation of the MOVI‑C® CONTROLLER.

INFORMATION

The fault-free boot application is always switched to "Run" state after having activated the MOVI‑C® CONTROLLER.