Torque control (Torque)

The Torque structure contains control and status variables for the "Torque control" operating mode. It is used to control the FCB 07 of the connected inverter. This operating mode is used to set the drives to a specified torque. If no other operating mode is active when setting xActivate to FALSE, the inverter switches to FCB 26.

The resulting behavior depends on the load. Without load, the drive accelerates to the specified maximum or minimum speed. When doing so, the effective torque is reduced to such a degree that the specified speed limits are not exceeded.

The specified torque is only achieved if the load is accordingly large.

Interface in the IEC Editor

• IN
• OUT