Startup procedure for motor startup
A universal motor data set with the same power rating is already preloaded at the factory. If better control performance is required or if the connected motor deviates from the inverter power, startup must be performed and the motor data must be entered. In the individual steps, enter the following information according to the nameplate of the connected motor.
7-segment display | Details | Unit/selection |
|---|---|---|
| Drive train | – |
| Nominal motor voltage | V |
| Nominal motor current | A |
| Frequency | Hz |
| Performance | kW |
| Power factor cos φ | – |
| Nominal motor speed | min-1 |
| Control mode |
|
| Brake |
|
| Motor temperature monitoring |
|
