Device description file

INFORMATION

A modified device description file can cause malfunctions in the device.
Do not change or expand entries in the device description file. SEW‑EURODRIVE assumes no liability for malfunctions of the device caused by a modified device description file.

A requirement for proper device configuration with fieldbus interface is that the matching device description file () is used in the engineering tool of the PROFINET controller. The file contains all the relevant data for engineering and for the data exchange of the device.

The current version of the device description file is available on the homepage of SEW‑EURODRIVE (www.sew-eurodrive.com). Search for "GSDML file" on the [Online Support] > [Data & Documents] > [Software] page.

The following table shows the names of the device description files of the individual devices:

Device

Device description file

MOVI‑C® CONTROLLER
standard UHX25A‑N

GSDML-Vx.yz-SEW-MOVI-C-CONTROLLER-UHX25-UHX45-yyyymmdd-hhmmss

MOVI‑C® CONTROLLER
advanced UHX45A‑N

GSDML-Vx.yz-SEW-MOVI-C-CONTROLLER-UHX25-UHX45-yyyymmdd-hhmmss

MOVI‑C® CONTROLLER
progressive UHX65A‑R

GSDML-Vx.yz-SEW-MOVI-C-CONTROLLER-UHX65-yyyymmdd-hhmmss

MOVI-C® CONTROLLER
power UHX85‑R

GSDML-Vx.yz-SEW-MOVI-C-CONTROLLER-UHX84-UHX85-yyyymmdd-hhmmss

MOVI‑C® FIELD CONTROLLER
standard MFC1../FHX25‑N

GSDML-Vx.yz-SEW-MOVI-C-CONTROLLER-FHX25-FHX45-yyyymmdd-hhmmss

MOVI‑C® FIELD CONTROLLER
advanced MFC1../FHX45‑N

GSDML-Vx.yz-SEW-MOVI-C-CONTROLLER-FHX25-FHX45-yyyymmdd-hhmmss