Guidelines for secure operation
Authorized personnel can use the SEW‑EURODRIVE engineering protocol to enable various service access functions on the device. This applies both to firmware versions prior to V20.00 and to firmware versions from V20.00 onward. Authentication is implemented by using static access data. This data is not used to defend against attacks on IT security, but rather to protect against unintentional modification. This is the reason why it cannot be changed.
To prevent misuse of these service access functions, restrict network access in accordance with current security best practices. For more information, refer to section IT security of the environment.
As of firmware version V20.00, authentication can also be performed via secure user management and access control.
Set up access logging in the system.
For further information, refer to the following documentation:
- "Cybersecurity for inverters of the MOVI-C® modular automation system" manual
- Separate, independent manuals may apply to different firmware versions. The firmware version to which a manual applies is indicated in the document title.