Mounting the keypad in the COG11A door mounting frame

Observe the following information:

  • Mount the CBG22A local keypad at a distance from the inverter in the COG11A door mounting frame with the UKS52A cable with an additional contact for a key switch. The key switch activates manual mode in the local keypad.
  • Mount the CBG11A or CBG21A keypad at a distance from the inverter in the COG11A door mounting frame with the UKS22A cable.

The following figure shows a mounting example with the CBG22A local keypad and an additional key switch:

[1]

Inverter (example illustration)

[2]

D-Sub cable, 9-pin

[3]

CBG22A local keypad

[4]

COG11A door mounting frame

[5]

Key switch (not available from SEW-EURODRIVE)