Error 18 Software error
Error: 18.3 (1203hex | 4611dec) Description: Task system – warning | ||
|---|---|---|
| Response: Remote – critical error System state: Error acknowledgment with CPU reset | |
Cause | Measure | |
A error was detected while processing the internal task system. | – Acknowledge the warning. – If the warning occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Error: 18.4 (1204hex | 4612dec) Description: Task system – error | ||
|---|---|---|
| Response: Remote – critical error System state: Error acknowledgment with CPU reset | |
Cause | Measure | |
An error was detected while processing the internal task system. | – Switch the device off and on again. – If the error occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Error: 18.7 (1207hex | 4615dec) Description: Fatal software error | ||
|---|---|---|
| Response: Remote – critical error System state: Error acknowledgment with CPU reset | |
Cause | Measure | |
A fatal software error was detected. | – Switch the device off and on again. – If the error occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Error: 18.8 (1208hex | 4616dec) Description: Invalid error code | ||
|---|---|---|
| Response: Remote – critical error System state: Error acknowledgment with CPU reset | |
Cause | Measure | |
An invalid error code was requested. | – Switch the device off and on again. – If the error occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Error: 18.9 (1209hex | 4617dec) Description: Internal software error | ||
|---|---|---|
| Response: Remote – critical error System state: Error acknowledgment with CPU reset | |
Cause | Measure | |
The software has signaled an unexpected event. | – Switch the device off and on again. – If the error occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Error: 18.10 (120Ahex | 4618dec) Description: Watchdog error | ||
|---|---|---|
| Response: Remote – critical error System state: Error acknowledgment with CPU reset | |
Cause | Measure | |
The watchdog has detected an error. The software is not operating within the intended cycle time. | – Switch the device off and on again. – If the error occurs repeatedly, contact SEW‑EURODRIVE Service. | |