Ensuring data consistency
To ensure data consistency, the following procedure must be observed:
- Apply inverter settings to the configuration of the inverter via one of the following procedures:
- Manually apply all setting values highlighted in blue (e.g. Stiffness/Zero clearance) for each inverter in MOVISUITE®.
- In the "Optimization functions" sections in the Inverter settings, click the "Transmit measured mean value to inverter and optimize speed controller" button. Then execute the function "All devices -> PC" in MOVISUITE®.
- Apply the software module settings using one of the following procedures:
- Manually apply all settings with a red background in MOVISUITE® in the configuration of the software module.
- Use the save button of the optimization monitor. Then execute the function "All devices -> PC" in MOVISUITE®.
- Update the configuration data via MOVISUITE®.
