On a MOVI‑C® CONTROLLER

Make sure to select the correct software license for the type class of the controller. The software licenses are stored on the MOVI-C® CONTROLLER in the licenses folder. The licenses folder also contains the file 3s.dat with the basic licenses of the system. This file is an integral part of a firmware version.

In the case of a project duplication, use the procedure described in the manual of the MOVI-C® CONTROLLER. This is the only way to ensure that the duplicated system has both the correct 3s.dat file and the correct software license file.

The following software modules are used on a MOVI‑C® CONTROLLER. Activate the memory card using the SMID. A description of the procedure can be found in chapter Activating a software license on a MOVI‑C® CONTROLLER.

  • ­MOVIKIT® ­AutomationFramework
  • MOVIKIT® Custom
  • ­MOVIKIT® ­DeviceIdentity
  • ­MOVIKIT® ­DeviceVitality
  • ­MOVIKIT® ­EnergyRecovery
  • ­MOVIKIT® ­EnergyRecovery ­ParallelMode
  • ­MOVIKIT® ­FilmFeeder
  • ­MOVIKIT® ­FlyingSaw
  • ­MOVIKIT® ­Gearing
  • ­MOVIKIT® ­Positioning
  • ­MOVIKIT® ­ProcessData
  • ­MOVIKIT® ­RotaryKnife
  • ­MOVIKIT® ­Winder
  • ­MOVIKIT® ­HydraulicController
  • ­MOVIKIT® ­CamSwitch
  • ­MOVIKIT® ­EncoderInterface
  • ­MOVIKIT® ­Motion ­addon ­AntiSway
  • ­MOVIKIT® ­PLCopen ­MotionControl
  • ­MOVIKIT® ­PLCopen ­MotionControl ­addon ­Camming
  • ­MOVIKIT® ­PLCopen ­MotionControl ­addon ­Gearing
  • ­MOVIKIT® ­PLCopen ­MotionControl ­addon ­Interpolation
  • ­MOVIKIT® ­MultiAxisController
  • ­MOVIKIT® ­MultiAxisController ­Skewing
  • ­MOVIKIT® ­MultiAxisController ­Torque
  • ­MOVIKIT® ­MultiAxisController ­TorqueSkewing
  • ­MOVIKIT® ­MultiAxisController ­addon ­Cascading
  • ­MOVIKIT® ­MultiAxisController ­addon ­CurveLimitation
  • ­MOVIKIT® ­MultiAxisController ­addon ­FourAxes
  • ­MOVIKIT® ­MultiMotion
  • ­MOVIKIT® ­MultiMotion ­Auxiliary ­Positioning
  • ­MOVIKIT® ­MultiMotion ­Auxiliary ­Velocity
  • ­MOVIKIT® ­MultiMotion ­Camming
  • ­MOVIKIT® ­MultiMotion ­Camming ­addon ­AntiSlosh
  • ­MOVIKIT® ­MultiMotion ­Camming ­addon ­Interpolation
  • ­MOVIKIT® ­MultiMotion ­Gearing
  • ­MOVIKIT® ­MultiMotion ­addon ­CombinedEncoderEvaluation
  • ­MOVIKIT® ­MultiMotion ­addon ­PositionController
  • ­MOVIKIT® ­OPC UA
  • ­MOVIKIT® ­OPC UA ­addon ­SensorInterface
  • ­MOVIKIT® ­PROFINET ­IO-Controller
  • ­MOVIKIT® ­EtherNet/IP ­Scanner ­
  • ­MOVIKIT® ­PowerAndEnergySolutions ­DirectMode
  • ­MOVIKIT® ­PowerAndEnergySolutions ­EnergyMode
  • ­MOVIKIT® ­PowerAndEnergySolutions ­ParallelMode
  • ­MOVIKIT® ­PowerAndEnergySolutions ­PowerMode
  • ­MOVIKIT® ­PowerAndEnergySolutions ­addon ­PredictiveChargeControl
  • ­MOVIKIT® ­Robotics
  • ­MOVIKIT® ­Robotics ­addon ­AdditionalAxes
  • ­MOVIKIT® ­Robotics ­addon ­Circle
  • ­MOVIKIT® ­Robotics ­addon ­CollisionDetection
  • ­MOVIKIT® ­Robotics ­addon ­ConveyorTracking
  • ­MOVIKIT® ­Robotics ­addon ­LargeModels
  • ­MOVIKIT® ­Robotics ­addon ­MediumModels
  • ­MOVIKIT® ­Robotics ­addon ­PreControl
  • ­MOVIKIT® ­Robotics ­addon ­TouchProbe
  • ­MOVIKIT® ­StackerCrane ­effiDRIVE
  • ­MOVIKIT® ­CombiTelescope ­
  • ­MOVIKIT® ­Web ­Visualization