Startup/operation
Do not deactivate monitoring and protection devices even for a test run.
When in doubt, switch off the device whenever changes occur in relation to normal operation (e.g. increased temperatures, noise, oscillation). Determine the cause of the fault and consult SEW-EURODRIVE, if necessary.
Where required, systems in which such devices are installed must be equipped with additional monitoring and protection devices in accordance with the respective applicable safety regulations, e.g. the law governing technical work equipment, accident prevention regulations, etc.
Additional preventive measures may be required for applications with increased hazard potential. Be sure to check the effectiveness of the protection devices after every modification.
Never plug or unplug connectors while they are energized.
