Information

Check that the following conditions have been met:

WARNING

An operator's machine that is not appropriately secured can fall down during gear unit installation or removal.
Severe or fatal injuries.
  • Protect the operator's machine against unintentional movement when installing or removing the gear unit.
  • Before loosening the shaft connections, make sure that the system is no longer strained.

NOTICE

Improper inspection/maintenance may result in damage to the gear unit.
Possible damage to property.
  • Prevent foreign particles from entering into the gear unit during maintenance and inspection work.
  • If you remove the gear unit cover, you must apply new sealing compound to the sealing surface. Otherwise, the tightness of the gear unit is not guaranteed. Contact SEW‑EURODRIVE in this case.
  • Do not clean the gear unit with a high-pressure cleaning device.

When using primary gearmotors, also observe the maintenance notes for the motor and primary gear unit in the accompanying operating instructions.

Only use original spare parts in accordance with the supplied spare and wearing parts list.