External corrosion protection

  • Clean the surfaces to be preserved.
  • Grease the shaft near the dust lip to separate the sealing lip of the oil seal and the anti-corrosion agent.
  • Preservation the exterior of shaft ends and unpainted surfaces with a wax-based protective coating (e.g. Hölterol MF 1424 from Herm. Hölterhoff, www.hoelterhoff.de).

 

INFORMATION

Consult the respective supplier regarding the compatibility with the oil that is used and the duration of corrosion protection for your particular gear unit design.
Observe the information in chapter Storage and transport conditions in the corresponding operating instructions. This chapter provides information on the possible storage periods in conjunction with adequate packaging – depending on the storage location.