Oil dipstick

  1. Clean the area around the oil dipstick. Unscrew the oil dipstick and remove it.
  2. Clean the oil dipstick with a clean cloth and screw it back into the gear unit hand-tight to the stop.
  3. Remove the oil dipstick and check the oil level. The oil level must be between markings [1] and [2].
  1. If the oil level is too low, proceed as follows:
  • Open the oil filling plug.
  • Fill in oil of the same oil grade until the oil level is in the middle between markings [1] and [2].
  1. If you have filled in too much oil, proceed as follows:
  • Adjust the oil level. The oil level must be between markings [1] and [2].
  1. Screw in the oil filling plug.
  2. Screw in the oil dipstick.