MOVIKIT® Velocity Drive

INFORMATION

More recent versions of the software than those listed in this table may be available.

Version

Change

1.1.200.1

MOVISUITE® V2.0

System package: 9

Release date:
August 2018

Device firmware: 3

First series version. For detailed information on the functions included, refer to the respective MOVISUITE® manual.

2.0.0.200

MOVISUITE® V2.1

System package: 10

Release date:
March 2019

Device firmware: 4 and 5

New functions:

  • MOVIKIT® Handshake: PO 1:15 is mapped to PI 1:15.
  • Timeout monitoring between Data Flexibility and basic unit via Heartbeat In (control word 2, bit 15) and Heartbeat Out (status word 2, bit 15)

Error corrections:

In version V1.1, bit PI 1:11 "Setpoint/actual speed comparison" signal did not provide a valid signal at negative speed in FCB 05.

3.0.3.200

MOVISUITE® V2.10

Release date:
July 2020

Device firmware: 6.0 and later

New functions:

  • Variable jerk time (1 PD)
  • Parameter channel via process data (5 PD)
  • Touchprobe function/length measurement (4 PD)

Change:

Assignment of digital inputs/digital outputs in delivery state:

  • All DIs = "No function"
  • All DIOs = Digital input – "no function"
  • When assigning MOVIKIT® Velocity Drive, the digital inputs/digital outputs are parameterized to "No function".

6.0.0.200

MOVISUITE® V2.20

Release date:
March 2021

New functions:

Variable torque limit Q1 (2 PD) in MOVISUITE® advanced

Error corrections:

The digital outputs are set to 0 in the event of a fieldbus timeout.

6.1.0.200

ModuleUpdatePackage V2.21.1

Release date:
July 2021

Error corrections:

  • With MOVITRAC® advanced, you can switch between drive trains.
  • MOVITRAC® advanced supports the DIOs.

9.0.4.200

MOVISUITE® V2.30

Release date:
March 2022

New functions/modified behavior:

  • Variable torque limit Q1 (2 PD) in MOVISUITE® standard
  • An additional bit for switching off speed monitoring has been added to the control word of the torque limit.

10.0.13.200

MOVISUITE® Data Update V2.31.2

Release date:
April 2023

New functions:

  • Changed behavior of the "Handshake In" bit: If the "Handshake In" bit is operated once, the application heartbeat timeout mechanism is active.

New devices:

  • Support for MOVIPRO® MPX
  • Support for compact, extra-low voltage drives (MOVIMOT® Performance ELV)
  • Support for MOVIDRIVE® modular MDA, MDD

Restrictions:

  • The additional function "Parameter channel via process data" is no longer available

10.1.11.200

MOVISUITE® V2.50

New functions:

  • Startup of the software module using the "startup assistant" tool
  • Changes in the parameter tree
  • The help texts of the parameters have been adjusted.

10.2.1.200

MOVISUITE® V2.60

New functions:

  • MOVIKIT® diagnostics overview optimized
  • Overview of inputs/outputs optimized
  • Scaling tool for analog inputs and analog outputs integrated. The scaling tool is only visible if the corresponding I/O extension is available.

New devices:

  • MOVITRAC® classic (via gateway)
  • MOVITRAC® basic (via gateway)