Removing EV../AV../XV..

  1. For size 250 – 280: Remove the screws [34] to disassemble the safety cover [361].
  2. For size 315: Remove the screws [1711] to disassemble the safety cover [657].
  3. Pull out the cable grommet [269] together with the encoder cable from the safety cover [361].
  4. Loosen the retaining screws [232] and turn the conical spring washers [251] outwards.
  5. Loosen the screw at the coupling clamping hub [233] at the encoder end, the screw can be accessed through the slots of the encoder mounting adapter [A].
  6. Remove the encoder [220] from the encoder mounting adapter [A] or the intermediate flange [225].