(4) – Connecting the EK8X conical encoder with the connection unit in the terminal box

  1. Unscrew the screws [123] to remove the terminal box cover [132].
  2. Remove the cover of the connection unit [1522] by pressing the cover on both sides behind the cable bushing.
  3. Connect the customer's evaluation unit for the encoder to the connection unit [1522] with a shield plate [1970]. Attach the cover of the connection unit [1522].
  4. Mount the terminal box cover [132] using the screws [123] (4 × M5 SW8).
    • Tightening torque 4 Nm