EK8C/EV8C/EK8X encoder – Integrated encoder connector – A1GA, A2GA – MOVITRAC® advanced
INFORMATION
The connection covers of the EK8X and .K8./.V8. encoder designs are not compatible. Observe the following information to avoid damaging the encoder:
- Do not use a .K8./.V8. connection cover with the EK8X encoder design.
- Do not use an EK8X connection cover with the .K8./.V8. encoder designs.
[1] | DR.. motors with integrated connector for encoder signals without connection cover on the motor, with connection cover on the cable. Connection type: A2GA. Encoder: EK8C, EV8C The signals for thermal monitoring of the motor are not transmitted in the encoder cable. |
[2] | DR.. motors with integrated connector for encoder signals with connection cover on the motor and open ends on the cable. Connection type: A1GA. Encoder: EK8C, EV8C The signals for thermal monitoring of the motor are not transmitted in the encoder cable. |
[3] | DR.. motors with integrated connector for encoder signals without connection cover on the motor, with connection cover on the cable. Connection type: A2GA. Encoder: EK8X The signals for thermal monitoring of the motor are not transmitted in the encoder cable. |
