Encoder .K8. – Terminal strip or M23 on the terminal box - AIGA, AIGB – MOVIDRIVE^®

D-sub → X..

X15: Connection of encoder/resolver to a MOVIDRIVE^® modular/system/technology basic unit

X17: CES11A multi-encoder card

A..Y encoders can be connected only to the CES11A multi-encoder card.

[1]

DR.. motors with terminal strip in the terminal box for encoder signals without thermal monitoring.

Encoder: .K8.

The signals for thermal monitoring of the motor are not transmitted in the encoder cable.

[2]

DR.. motors with terminal strip in the terminal box for encoder signals and TF thermal monitoring.

Encoder: .K8.

The signals for thermal monitoring of the motor are transmitted in the encoder cable.

[3]

DR.. motors with M23 connector on the terminal box for encoder signals.

Connection type: AIGA

Encoder: .K8.

The signals for thermal monitoring of the motor are not transmitted in the encoder cable.

[4]

DR.. motors with M23 connector on the terminal box for encoder signals and TF thermal monitoring.

Connection type: AIGB

Encoder: .K8.

The signals for thermal monitoring of the motor are transmitted in the encoder cable.