Connectable devices

The supply and regenerative modules should only be connected to the following modules in the DC link:

• MDA90A-.. axis modules
• MDD90A-.. double-axis modules
• MDD91A-.. double-axis modules
• MDS90A-.. switched-mode power supply module
• UHX45A/MDM90A-.. master module
• MDF90B-.. filter module

The MDA axis modules and MDD double-axis modules can be used with firmware 8.0 or later. A firmware update is necessary for older devices. Contact SEW-EURODRIVE for this service.

The firmware can be viewed in the device status on the nameplates of the MDA axis modules and MDD double-axis modules.