System bus EtherCAT®/SBusPLUS
For connecting the EtherCAT®/SBusPLUS system bus, SEW‑EURODRIVE recommends using only prefabricated cables from SEW‑EURODRIVE.
NOTICE
Use of wrong cables
Damage to the application inverter
Only 4-pole cables are permitted to be used as system bus cables [2]. If an 8-pole cable is used, malfunctions or failures may occur at the connected devices.
INFORMATION
The mounting plates on which the axis systems are mounted must have a sufficiently large ground connection, e.g. a ground strap.
Additional information
