CombiTelescope

Basic settings

Number of belts

Number of belts in the application

Index: 50030.100

IEC name: -

Length of belt conveyor [6]

Length of the belt conveyors in the application
All belt conveyors must have the same length.

Index: 50030.101

IEC name: -

Shortest box length

Shortest box length in the storage location

INFORMATION: This parameter has no influence on the function of the software module. The parameter is used to generate suggested values for the "Belt stop distance" and "Belt pretravel distance" parameters in order to enable a more dynamic process initially when configuring the software module.

Index: -

IEC name: -

Distance between belt end and storage location

Distance from the end of the belt to the storage rack.

INFORMATION: This parameter has no influence on the function of the software module. The parameter is used to generate suggested values for the "Belt stop distance" and "Belt pretravel distance" parameters in order to enable a more dynamic process initially when configuring the software module.

Index: -

IEC name: -

Transfer to stock

Distance of box to belt end [2]

Distance of box to belt end

Index: 50030.106

IEC name: -

Distance of telescope in home position to belt end [3]

Distance of telescope in home position to belt end

Index: 50030.107

IEC name: -

Belt stop distance

Belt overtravel distance after the box has left the belt.

Index: 50030.108

IEC name: -

Remove from stock

Belt pretravel distance [4]

Pretravel distance of the belt during retrieval. This distance is allowed for the belt for acceleration so that a transfer speed of the box other than 0 can be reached.

Index: 50030.112

IEC name: -

Belt overtravel distance [5]

Overtravel distance of the belt once the box is completely on the belt. The retrieved box is positioned at this distance from the end of the belt.

Index: 50030.111

IEC name: -

Continuation after uncoordinated stop

Allow travel to continue

In the event of an uncoordinated stop, the job is not canceled but is interrupted. In this case, the further travel is adjusted to reduce the risk.

Index: 50030.116 Bit0

IEC name: -