Reference travel

INFORMATION

This configuration menu is only displayed when using virtual axes. The reference travel of real axes is configured in the configuration menu "Drive functions" > "FCB12 reference travel".

Parameter designation

Description

Reference travel

Reference travel type

  • Referencing without reference travel (with enable)
  • INFORMATION: This reference travel type also allows referencing without enable.

Index: 50007.1

IEC name: ProfileGeneration.Homing.Config.eReferenceTravelType

Reference offset

Deviation of the cam from the machine zero

Index: 50007.2

IEC name: ProfileGeneration.Homing.Config.lrReferenceOffset

Advanced settings

Save referencing in a power failure-safe manner

  • Yes – Referencing is saved in a power failure-safe manner. A referenced axis reports the signal even after the MOVI-C® CONTROLLER is switched on again.
  • No – Do not save referencing in a power failure-safe manner.

Index: –

IEC name: –