Fault 149 MOVIKIT® – Controller firmware
Fault: 149.240 (95F0hex | 38384dec) Description: Warning: Value transferred to the inverter too large | ||
|---|---|---|
|
| |
Cause | Measure | |
Internal error | Contact SEW-EURODRIVE Service. | |
Fault: 149.241 (95F1hex | 38385dec) Description: Warning: Value transferred to the inverter too small | ||
|---|---|---|
|
| |
Cause | Measure | |
Internal error | Contact SEW-EURODRIVE Service. | |
Fault: 149.242 (95F2hex | 38386dec) Description: Inverter warning | ||
|---|---|---|
|
| |
Cause | Measure | |
An inverter warning is present. | Observe the description in MOVISUITE® or the inverter manual. | |
