Removing and attaching the safety cover

The inverter is equipped with a safety cover [1].

Removing the safety cover

Proceed as follows:

  1. The safety cover [1] has a latching mechanism at the bottom. To release the latching mechanism, pull the lower end of the safety cover away from the inverter.
  2. Pivot the safety cover forward and lift it up and out of the mounting.

INFORMATION

Always mount the safety cover after performing installation work.
Mounting the safety cover

Proceed as follows:

  1. Place the safety cover [1] into the upper mounting.
  2. Pivot the safety cover toward the inverter until it latches.