Lubricant fill quantities

The following tables show guide values for lubricant fill quantities in relation to mounting positions M1 to M6.

The exact values vary depending on the number of gear stages and the gear ratio. Always check the oil level plug during filling for the exact oil quantity.

Unless a special arrangement is made, SEW‑EURODRIVE supplies the drives with a lubricant fill adapted for the specific mounting position. The decisive factor is the specification of the mounting position when ordering the drive.

When the mounting position is changed, the lubricant fill quantity must be adapted accordingly (see the following chapters). Do not change the mounting position without prior consultation with SEW‑EURODRIVE, otherwise the rights to claim under limited warranty become void.