Connection of the supply cable ECC-DFC-..-00/ECC-DFC-..-0B

Do the following to connect the voltage supply to the supply terminal:

  1. Remove the cover from the supply terminal, as described in chapter Covers.
  2. Install the protective grommet for IP54 degree of protection on the connection cable, as described in chapter Assembling protective grommets.
  3. Remove the cable jacket of the connection cable using suitable tools.
  4. Connect the connection cable to the spring terminal strip.
  5. Pull the protective grommet over the edge of the terminal chamber.
  6. Install the cover on the supply terminal.