Fault 18 Software error
Fault: 18.4 (1204hex | 4612dec) Description: Task system – fault | ||
|---|---|---|
| Response: FS – system fault | |
Cause | Measure | |
Fault detected while processing internal task system. | – Switch the device off and on again. – If the fault occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Fault: 18.7 (1207hex | 4615dec) Description: Fatal software fault | ||
|---|---|---|
| Response: FS – critical fault | |
Cause | Measure | |
Fatal software error detected. | – Switch the device off and on again. – If the fault occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Fault: 18.9 (1209hex | 4617dec) Description: Internal software fault | ||
|---|---|---|
| Response: FS – critical fault | |
Cause | Measure | |
The software has reported an unexpected event. | – Switch the device off and on again. – If the fault occurs repeatedly, contact SEW‑EURODRIVE Service. | |
Fault: 18.109 (126Dhex | 4717dec) Description: Internal software error (message) | ||
|---|---|---|
| Response: FS – message | |
Cause | Measure | |
The software reports an unexpected event. | – Switch the device off and on again. – If the message occurs repeatedly, contact SEW‑EURODRIVE Service. | |
