Connection diagram MOVIMOT® flexible DFC
The following figure shows the connections of the device:
[1] | Without function for electronics cover in connection configuration DFC.1.. and DFC.2.. |
[2] | Only for electronics cover in connection configuration DFC.0.. |
[3] | Only for electronics cover in connection configuration DFC.0.. and DFC.1.. |
[4] | Jumpers installed at the factory for designs without plug connectors with STO function. For further information, refer to chapter Connection variants of the STO safety sub-function in the product manual. |
[5] | Devices with option /BES include additionally integrated auxiliary terminals. These auxiliary terminals are intended for connecting the BES brake rectifier only. Do not change the installation of this auxiliary terminal. |
[6] | Connection unit option, see chapter Type designation of MOVIMOT® flexible DFC |
For terminal assignment, refer to chapter Terminal assignment of MOVIMOT® flexible DFC.
For the positions of the plug connectors, refer to chapter "Plug connectors" > MMF1 design, MMF31 design, MMF32 design, DFC electronics cover.
For further information regarding the brake control, refer to the product manual > chapter "Technical data" > Brake control.
