Motor malfunctions
The following table shows fault diagnostics options for malfunctions of the motor:
Fault | Possible cause | Measure |
|---|---|---|
Motor heats up excessively and trips an error | Overload | Measure power, use larger motor or reduce load if necessary, check travel profile |
Ambient temperature too high | Observe permitted temperature range | |
Insufficient cooling | Clean the drive | |
Running noise on motor | Bearing damage |
|
Vibration of rotating parts | Rectify cause, possible imbalance | |
Oil leaks in the connection box or at the motor/gear unit connection (only with gearmotors) | Internal seal defective |
|
