Examples of MOVIMOT® performance
The following figure shows an example of the installation of the threaded blanking plugs, cable glands and electronics cover. The number and position of threaded blanking plugs and cable bushings depend on the ordered variant.
[1] | Tighten the screws in diametrically opposite sequence with a tightening torque of 6.0 Nm (for size 1) or 9.5 Nm (for size 2). |
[2] | Tighten the cable gland with a tightening torque according to chapter "Tightening torques for cable glands". |
[3] | Tighten the threaded plastic blanking plugs supplied by SEW-EURODRIVE with a tightening torque of 2.5 Nm. |
