Disabling DynaStop® by removing the electronics cover

Deactivate the DynaStop® function as follows:

  1. Observe the chapter "Startup information".
  2. Observe the chapter "Important information about deactivating DynaStop®".
  3. De-energize all of the components and safeguard them with an external switch-off device to prevent unintentional activation of the voltage supply.
  4. Remove the electronics cover completely.

The DynaStop® function is deactivated as a result. The system/machine can be moved mechanically taking into account the information in chapter "Important information about deactivating DynaStop®".