DIP switch S2/2: Source of setpoint f1

Use this DIP switch to select the source of the speed setpoint f1.

• Potentiometer f1 (S2/2 = OFF): The setting of potentiometer f1 defines the speed of the drive unit when setpoint f1 is active (see chapter "Startup" > "Control elements" > Potentiometer f1).
• Analog input AI1 (S2/2 = ON): The value of analog input AI1 determines the speed of the drive unit when setpoint f1 is active. (See product manual, chapter "Startup" > Setpoint scaling of the analog input).