Installing the electronics cover

Install the electronics cover as follows:

  1. WARNING! Risk of burns due to hot surfaces. Severe injuries. Let the device cool sufficiently before touching it.
  2. NOTICE! Loss of the guaranteed degree of protection. Possible damage to property. When the electronics cover is removed from the connection box, you have to protect the electronics cover and the wiring space from humidity, dust or foreign particles.
  3. Use only electronics covers that match the size.
  4. Fit the electronics cover to the connection box. Make sure that the electronics cover does not become jammed.
  5. Screw the electronics cover onto the connection box with 4 screws. Tighten the screws step-by-step in diametrically opposite sequence with a tightening torque of 6.0 Nm.