Replacing the output oil seal

  1. Perform the steps according to chapter Preliminary work regarding inspection and maintenance.
  2. Remove the drive unit from the system.
  3. NOTICE! If oil seals are below 0 °C, they can be damaged during assembly. Damage to property. Store oil seals at an ambient temperature above 0 °C. If necessary, warm up the oil seals prior to assembly. When changing the oil seal, ensure that there is a sufficient grease reservoir between the dirt lip and sealing lip, depending on the design used.
    • When using double oil seals, fill one-third of the gap with grease.
    • The oil seal must not be reinstalled on the same track.
  4. Touch up or renew the surface/corrosion protection coating.