Installing the fixed safety cover

NOTICE

Damage to the drive unit due to improper use of the threads.
Damage to property.
  • Consult SEW-EURODRIVE before using threads for other applications.

Install the safety cover as follows:

  1. Perform the steps according to chapter Installation notes.
  2. Fit the safety cover [2] onto the adapter plate [1].
  3. Fasten the safety cover in the bore provided for this purpose using the enclosed screw and serrated lock washer. The permitted tightening torque for the M4×10 screw is 3.3 Nm.

    4. [1]

    Bore

    [2]

    Serrated lock washer

    [3]

    M4×10 screw