Unsupported functions

G6 Parable interpolation

G33 Thread cutting, constant gradient

G34 Thread cutting, constantly increasing gradient

G35 Thread cutting, constantly decreasing gradient

G40 Nullify tool correction

G41 Tool path correction, left

G42 Tool path correction, right

G43 Tool correction, positive

G44 Tool correction, negative

G54 Selection of user coordinate system 1

G55 Selection of user coordinate system 2

G57 Selection of user coordinate system 4

G58 Selection of user coordinate system 5

G59 Selection of user coordinate system 6

G63 Tapped holes

G70 Dimensions in inch (the dimensions must be specified in mm)

G71 Dimensions in millimeters (the dimensions must be specified in mm)

G74 Travel to reference point/travel to home position axially

G80 Cancel work cycle

G81 Work cycle 1

G82 Work cycle 2

G83 Work cycle 3

G84 Work cycle 4

G85 Work cycle 5

G86 Work cycle 6

G87 Work cycle 7

G88 Work cycle 8

G89 Work cycle 9

G92 Set memory

G93 Time-reciprocal feed encryption

G94 Indication of feed speed in mm/min (in/min)

G95 Specification of feed speed in mm per revolution (inch per revolution)

M6 Tool change

M40 Automatic gear unit stage selection

M41-M45 Gear unit stage 1-5 for master spindle

M48 Overlapping effective

M49 Overlapping ineffective

M60 Workpiece change

E Second feed

S Spindle speed

T Tool

D Tool correction memory