Release brake with controller inhibit

INFORMATION

This function must be enabled in the configuration of the frequency inverter in the "Drive functions" configuration menu in the "FCB 01 Output stage inhibit" submenu via the slider "Release brake/deactivate DynaStop^® with FCB 01 – Enable".

The brake of the drive can be released if controller inhibit is set on the axis. On a MultiAxisController axis group, all brakes of the lower-level stations are released.

MOVIKIT® StackerCrane effiDRIVE®

Release brake with controller inhibit

INFORMATION

This function must be enabled in the configuration of the frequency inverter in the "Drive functions" configuration menu in the "FCB 01 Output stage inhibit" submenu via the slider "Release brake/deactivate DynaStop® with FCB 01 – Enable".

This function must be enabled in the configuration of the frequency inverter in the "Drive functions" configuration menu in the "FCB 01 Output stage inhibit" submenu via the slider "Release brake/deactivate DynaStop^® with FCB 01 – Enable".