Hardware

The following hardware is required:

  • MOVI-C® CONTROLLER of the following power class
    • To use the MOVIKIT® StackerCrane with the MultiAxisController, at least one MOVI-C® CONTROLLER UHX45A is required.
    • To use the MOVIKIT® StackerCrane with the MultiAxisController and the AntiSway add-on, at least one MOVI-C® CONTROLLER UHX65A-02 is required.
  • MOVIDRIVE® modular, MOVIDRIVE® system or MOVIDRIVE® technology (as interpolating device)

INFORMATION

Contact SEW‑EURODRIVE Service if you want to use the software module with generation C devices such as MOVITRAC®, MOVIGEAR®, MOVIMOT®.

INFORMATION

Make sure that all drives of a MultiAxisController axis group have the same drive train. Otherwise, contact SEW‑EURODRIVE.