Licensing

The following licenses are available or are required:

  • MOVIRUN® flexible
  • License for the MOVIRUN® flexible software platform
  • MOVIKIT® Gearing
  • License for the MOVIKIT® Gearing software module

 

The MOVIKIT® Gearing license is also covered by the MOVIKIT® MultiMotion Gearing and MOVIKIT® MultiMotion Camming licenses.

The license/licenses are referred to as performance licenses. They only have to be purchased once per MOVI-C® CONTROLLER and can then be used for any number of axes.

If you do not have a valid license for the software module, you can first use a 7-day trial license to test the functionality.

INFORMATION

If there is no license for MOVIKIT® Gearing on the memory card of the MOVI-C® CONTROLLER, two licenses (MOVIKIT® Gearing and MOVIKIT® MultiMotion Gearing) will be indicated as missing in the MOVISUITE® License Manager when the software is started for the first time. In this case, use the context menu of the entry in the MOVISUITE® License Manager to delete the MOVIKIT® MultiMotion Gearing license and then continue to activate the MOVIKIT® Gearing license.

For further information on licensing, refer to the document "MOVI‑C® Software Components". You can download the document from the SEW‑EURODRIVE website (www.sew‑eurodrive.com).