Log function

For advanced diagnostics, all messages generated by the software modules on the MOVI-C® CONTROLLER can be viewed even after acknowledgment using the log function. To view the log function, do the following:

  1. Open the IEC Editor via MOVISUITE®.
  2. In the IEC Editor, double-click the object "Device (MOVI-C® CONTROLLER)" in the device tree.
  3. Open the "Log" tab.
  4. Select the entry "MOVIKIT" as logger ("MOS" in older versions).
  5. Click the green [Update] button.
    • You can now check the messages and, if necessary, fix the cause of a problem.