Process data length

INFORMATION

The MOVIKIT® software modules of the "Drive" category offer optional functions that extend the process data length.
  • Make sure that the process data length is set correctly for the individual axes.

In this example, the following axes are also equipped with a MOVISAFE® CS..A safety option that enables PROFIsafe communication:

  • Axis3_MDA
  • Axis5_MOVIDRIVE_Technology
  • Axis7_MOVIDRIVE_System
  • Axis8_MOVITRAC_Advanvced

For detailed information on PROFIsafe configuration, refer to the "Controllers of the MOVI-C® Modular Automation System, Startup with PROFINET/PROFIsafe" manual.

INFORMATION

The correct assignment of the process data length of the individual axes must be ensured.
If you make a mistake during configuration, the process data from the "Gateway Solution" application might be routed to an incorrect axis. This can result in undesired effects.
  • Make sure that the process data length is set correctly for the individual axes.