Activating manual mode
Proceed as follows to use manual mode:
- On the start screen, activate the "Manual" check box for all devices that you want to control manually. If you want to activate manual mode for all devices on the start screen, click "Activate manual mode for available devices" under "Mode" in the menu bar.
- The selected devices can be controlled manually using the buttons on the start screen. As controllers do not have any scope function, only the button [Param upload and save] is available for these devices.
- The settings for saving parameter and scope data, the file names and the storage locations are adopted from the Device list.
- Control the operation using the following buttons on the start screen:
No. | Use |
|---|---|
[1] | Start scope recording |
[2] | Stop scope recording |
[3] | Set trigger |
[4] | Upload and save scope data |
[5] | Upload and save parameter data |
[6] | Initial download of scope template to the frequency inverter |
[7] | Upload and save a device parameter set |
