Requirements
Before you can take an application into operation, the following requirements must have been met:
- MOVISUITE® is installed on your computer. MOVISUITE® has the IEC Editor program integrated for programming the MOVI‑C® CONTROLLER.
- For information on MOVISUITE®, refer to the "MOVISUITE®" manual.
- The EtherCAT®/SBusPLUS stations are connected to the MOVI‑C® CONTROLLER. For more information, refer to the "MOVI‑C® CONTROLLER" manual
- The MOVI‑C® CONTROLLER is connected with the computer via Ethernet.
- MOVISUITE® is started.
INFORMATION
