Brake control
INFORMATION
Note that with BD1B or SBM, only brakes up to size BE32 can be controlled.
For technical data of the SBM safe brake module, refer to chapter SBM safe brake module.
Note the limited motor cable lengths of 20 m when using the BD1B brake control with a nominal voltage of 230 V and the brakes BE30/BE32.
Supported brakes | BD1B brake control | DC 24 V brake controlThe 24-V brake control (BMV5) is only available up to size 3 (32 A/15 kW). |
|---|---|---|
Brake types | Brakemotors from SEW-EURODRIVE with a two or three-wire brake, e.g. BE.., BZ.. | Brakemotors from SEW-EURODRIVE with a two-wire brake (DC), e.g. BP.., BK.. Three-wire brake not permitted |
Third-party motors with a two or three-wire brake | Third-party motors with a two-wire brake (DC) Three-wire brake not permitted | |
Nominal voltage of the brake | AC 230 V, AC 400 V, or AC 460 V | DC 24 V |
Brake holding current IH
| DC 1.2 A at 230 V | Max. 3.0 A
|
DC 0.7 A at 400 V | ||
DC 0.6 A at 460 V | ||
Acceleration current | Depending on the brake type, 4 – 8.5 times the holding current (for 200 ms) | – |
