Terminal assignment for low temperature variant
WARNING
Electric shock due to a faulty or missing connection of the miniature circuit breaker for the cooling unit, see Other applicable documentation.
Severe or fatal injuries.
- Connect the energy storage system to a circuit breaker
- Check if the circuit breaker is properly installed.
Terminal | Connection | Brief description |
|---|---|---|
L1:1 | +Uz | DC link connection |
L1:2 | -Uz | |
X1:1 | -ES | Measurement connection negative pole balancing |
X1:2 | 24V_in | 24 V supply |
X1:3 | 0V_in | |
X1:4 | Normally open | Door position switch (NO contact) |
X1:5 | ||
X10:1 | L1 | AC power supply for heater External, AC 230 V 1ph (CE)/AC 115 V 1ph (UL) |
X10:2 | N | |
X10:3 | PE | |
BK:1 IN | EtherCAT® | System bus |
PE | PE | PE connection |
